|
|
Universal Measurement Interface for Digital Audio Signal
Gál, Marek
This article deals with a modification of existing project which is used as a helpful tool for tracking and measuring digital audio interface I2S. Modifications are based on practical one year experience when the device was tested and deals with new requirements for extension.
|
|
|
Peristaltic pump control via USB interface
Balogh, Jaroslav ; Chmelař, Milan (referee) ; Čech, Petr (advisor)
The purpose of this bachelor’s thesis is to practical realization of connection between peristaltic pump Rainin Dynamax RP-1 and PC, using USB interface. Integrated circuit device FT232R has been used in USB-RS422 converter, due to modified RS422 interface, which the pump RP-1 uses. There was also developed software for pump’s remote controll. RP-1’s functions can be driven from remote side or eventually automatized with this software. This work is based on semestral thesis and in future can be used in another aplications with RS422 or with RP-1 pump. Department of Biomedical Engineering, attached to FEEC, Brno University of Technology, will use this remote controll in analysis of DNA.
|
|
|
PC Controlled PLL Synthesizer
Málek, Miroslav ; Šrámek, Petr (referee) ; Vágner, Petr (advisor)
The aim of this bachelor´s thesis is a practical realization of computer controlled PLL synthesizer using USB serial port. FT232RL was used as an interface between the PLL synthesizer ADF4110 and PC. A software with graphical user interface was also developed in order to control registers of the syntesizer.
|
|
|
Traffic Situation Model
Dvořák, Michal ; Petyovský, Petr (referee) ; Horák, Karel (advisor)
In this thesis, parameters required for physical construction of model of traffic camera system are identified. The information is used to design and construct a model, which supports simulation of important traffic situations. With focus, on the ability of model to allow for digital modification of simulation parameters over, for this purpose created, communication interface. The next part of thesis then focuses on creation of application which supports the control and image retrieval from group of cameras. The application is designed to support settings necessary for use as average speed enforcement cameras and as red-light cameras.
|
|
|
Design of Flow, Temperature and Pressure Measuring System
Macíček, Ondřej ; Čížek, Martin (referee) ; Sekora, Jiří (advisor)
This master’s thesis contains complete design of the complex measuring system for temperature, pressure and flow. Objects of measuring are pressure in rabbit’s heart ventricle, flow of the saline through the heart and the temperatures of physiological solution. Work is interested in programming of microcontroller and program for LabVIEW environment, which is used to view and export relevant data related to measuring. Text also contains technical documentation of functional sample of measuring system.
|
|
|
Data concentrator for data acquisition and wireless modules
Palacký, Tomáš ; Pásek, Jan (referee) ; Fiedler, Petr (advisor)
This master’s thesis deals with design and construction of a system for repote measurement of air quality in buildings. The first section provides a selection and analysis of used hardware and software components: minicomputer Raspberry Pi, STM32F401 microcontroller, communication module XBee-Pro, CO2 sensor and also communication interfaces IC and USART. The next section includes a design of electrical wiring, circuit board, configuration of the wireless modules and a software implementation for microcontroller and the concentrator.
|
|
|
Altitmeter for RC aircraft models
Švec, Jan ; Frýza, Tomáš (referee) ; Prokopec, Jan (advisor)
The aim of my bachelor thesis is to design a altimeter, who uses to record the attitude of the model "RC plane" evaluation of the current atmospheric pressure. The data are storaged during the flight into memory. Data can be after the recording through the USB transferred to the PC store. The software on the PC communicates with the device and ensuring the conversion of recorded pressure to altitude RC model.
|
|
|
Rotary controller for PC
Olivík, Lukáš ; Horák, Martin (referee) ; Kolka, Zdeněk (advisor)
This thesis describes the Universal Serial Bus and the development of a simple HID peripheral device, connecting a rotary encoder as a control element to the host computer. This paper includes an overview of suitable microprocessors, circuit design, PCB and mechanical design, creation of a firmware for the selected microprocessor, and programming of demonstration software on the PC’s side.
|
|
|
System for communication between model car and PC
Petrov, David ; Beran, Jan (referee) ; Macho, Tomáš (advisor)
Bachelor thesis addresses communication between PC and carriage. It includes analysis of possible ways to transfer commands from PC to mobile robot. The resulting solutions are selected hybrid wireless modules Aurel RX BC-NBK-433 and TX-SAW433 / s working in the band 433 - 868 MHz. For the processing of transmitted data is used microcontroller PIC16F627A.
|
|
|
Electronic game Logic
Zemanová, Renata ; Šteffan, Pavel (referee) ; Háze, Jiří (advisor)
The goal of this bachelor thesis is to design and manufacture an Electronic game Logic. This electronic game should look like the board game and also respect the game’s rules. The electronic game is designed as one PCB that contains control electronics and play units. The functional PCB containing all electronics was manufactured. The game was programmed, and the final version was placed in a designed case. The Electronic game Logic also allows the player to set game mode options.
|
guest ::
